Accessory

For use with pressure washers with an M22 hose coupling.  The soft grip trigger gun is rated up to 4000 PSI (280 bar), 25 litres per minute at 150°C.  Comes with 500mm lance with 11.6mm (1/4") quick release outlet for nozzles.  Suitable for both hot water and cold water pressure washers. Overall length including gun is 1m long.

High pressure hose reel with fixed mounted base, direct hand crank rewind, locking mechanism, full flow swivel joint and 3/8" male screw connector.  Designed to take up to 100ft / 30m high pressure hose (hose not included). SpecificationMax. Capacity: 100ft / 30 metre 3/8" hose Max. Pressure: 275 Bar Max. Temperature: 70°C Inlet: 3/8" Male BSP Screw Thread Outlet: 3/8" Female BSP Screw Thread Base Mount Hole Dimensions: 8.5cm x 8.5cm

Kew Industrial bayonet to 1/4" male screw thread coupling.  For Nilfisk / Alto Industrial and Kranzle (D12 type coupling) machines.

This belt makes cleaning an easier and more comfortable experience by lessening the strain on your back, arm and shoulders.

M22 male screw thread to 1/4" female screw thread coupling, widely used to connect 1/4" lances and accessories to M22 high pressure trigger guns. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Nozzle Holder coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a standard lance (1/4" screw thread).  Plastic shroud.

Ideal for removal of surface rust or paint on metal.  Attach the sand blast kit to your pressure washer and place the suction head into a bag of dry sand. The sand will be sprayed in solution with water.Adapters available to fit Bosch, Karcher K-series, Kew Industrial, Lavor and Nilfisk Alto pressure washers. 70 bar minimum, 160 bar maximum operating pressure.  To be used with 0.2-0.8mm grit sand.

M22 male screw thread to 1/4" male screw thread coupling. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

M22 male to M22 male screw thread coupling with grip ring NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

This set includes two couplings:1x 14.8mm (3/8") quick release male to 3/8" female screw coupling1x 14.8mm (3/8") quick release female to 3/8 female screw coupling

Karcher Easylock (EASY!Lock) female to M22 male screw coupling adapter, used to convert old style M22 fittings to the new Easylock system and vice versa.

M22 female screw thread to 1/4" male screw thread coupling adapter connector. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Heavy duty trigger gun rated up to 4000psi with 3/8" female screw thread coupling on inlet (to connect to hose) and 1/4" female screw thread to outlet (to connect to lance).  This trigger gun can be fitted to various brands (Karcher, Kew, Alto, Kiam, Mac, Cleanwell, Nilfisk, Kranzle, etc.) with the correct coupling (not included). Specification Max. Pressure: 4000psi / 280 barMax. Flowrate: 25 litres per minuteMax. Temperature: 150°COutlet: 1/4" female screw threadInlet: 3/8" female screw thread

Used to connect an M22 type hose to new CLICK style Karcher pressure washer outlet connector. Ideal if you want to fit industrial accessories to your domestic machine.

5.4m (18') telescopic lance for use with mobile pressure washers used for cleaning house facades, windows, guttering, fascias, brickwork, high sided vehicles and machinery.  This three section, innovative design retracts to a more manageable size and allows for easier field maintenance.  Features socket lock system on the poles for strength and durability. Work from the safety of the ground as  there is no need for the use of expensive scaffolding or ladder systems, simply clip on the gun to the high pressure hose and start cleaning. Features:5.4m fully extended (two section) 2m fully retractedCan be used with both hot and cold pressure washers Max. 4000 PSI (275 bar) up to 90°C at 23 lpm Comes complete with high pressure wash gun fitted Manufactured in fibreglass and aluminium for lightness and durability N.B. This lance does not fit onto domestic brand pressure washers i.e. Karcher N.B. Coupling on trigger gun is 14.8mm (3/8") quick release male, please make sure you have the correct coupling on your hose N.B. Requires 1/4" BSP nozzle (not included)

3/8" male screw coupling to M22 (14mm spigot) female coupling.  One of the most popular high pressure hose couplings on European pressure washers including Karcher, Ehrle, Gerni, Portotechnica etc. Note: This M22 has a 14mm spigot, this will not suit couplings that require a 15mm spigot

Heavy duty industrial trigger gun with side handle and soft touch rubber grips rated up to 4000PSI (275 Bar) / 60°C.  Fitted with a 3/8" (14.8mm) male quick release connection to hose and a M22 female connection to a lance. Includes 500mm lance with a 1/4" (11.6mm) female quick release outlet.  Overall length of trigger gun and lance is 1.07m.Nozzles Included:One * 00 needle / pencil nozzle for directional sprayOne * 15 degree nozzle for narrow sprayingOne * 25 degree nozzle for medium fan sprayOne * 40 degree wide angle fan sprayOne * 80 degree low pressure detergent nozzleOne * Turbo nozzle

The best selling pressure washer accessory.  Fantastic power and performance from this spinning nozzle which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork.  The Turbo nozzle almost doubles the cleaning power.  Brilliant on block paving and for removal of moss and green algae.  Will fit all standard lances with 1/4” male threaded end or 1/4" (11.6mm) quick release outlet. Max. pressure 4000 PSI (280 bar) at 100°C.  Note: Rubber outer sleeve colour may vary. 11.6mm (1/4") quick-release high pressure nozzle jets to fit on any standard 11.6mm (1/4") quick release nozzle holder / lance. Set Also Includes:1x 00 needle / pencil nozzle for directional spray1x 15 degree nozzle for narrow spraying1x 25 degree nozzle for medium fan spray1x 40 degree wide angle fan spray1x 65 degree low pressure detergent nozzle Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs.Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Kew Industrial bayonet to 1/4" female screw thread coupling.  For Nilfisk / Alto Industrial and Kranzle (D12 type coupling) machines.

Heavy duty industrial trigger gun with side handle and soft touch rubber grips rated up to 4000PSI (275 Bar) / 60°C.  Fitted with a 3/8" (14.8mm) male quick release connection to hose and a M22 female connection to a lance.  Includes a twin outlet lance with a 1/4" (11.6mm) female quick release outlet and a low pressure nozzle.  The lance features a high-low switch valve with handle to allow quick change between high and low pressure application.  Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.  

  The four nozzles clean and wash away the debris on the floor at a constant distance and constant speed for the ULTIMATE PROFESSIONAL CLEAN.  The roller casters keep the jets at the correct distance from the ground, making it easy to control and eliminate the risk of damaging patio grouting by holding the nozzle too close, which is easily done when just using the lance.  Fitted with a 11.6mm (1/4") male quick release to attach straight onto the end of a quick release lance or trigger gun.

Retractable high pressure hose reel complete with mounting base and 1.3m short hose tail.Designed to take a 20m high pressure hose (not included) and features a mounting plate for floor or wall mounting. Has a 14.8mm (3/8") male quick release inlet and a 3/8" male screw thread outlet.Dimensions.Mounting plate: 24cm * 19cm squareDrum diameter: 45cmHeight: 48cm to Bracket hose outlet CAPACITY: 20 MetresMAX WORKING PRESSURE: 400 Bar / 5800 PSIMAX TEMPERATURE: 150CINLET: 14.8mm (3/8") male quick releaseOUTLET: 3/8" male screw thread

 Suitable for use with high pressure washers to remove film and general soilage from bodywork and chassis of vehicles. Also used as a general degreaser for cleaning of soffits and fascias. Can be used with hot or cold water. Completely safe and non caustic detergent that wont dull the colours, it will remove the dirt and grime and have it looking like new again.

Kiam trigger gun and 500mm lance rated up to 250 Bar at 90°C.  It has a 3/8" (14.8mm) male quick release connector at the bottom of the gun to attach to a hose and a 1/4" (11.6mm) female quick release outlet at the end of the lance to attach a quick release nozzle.