Pressure Washer Accessories

Replacement rear wheel for Kiam KV60-2, KV60-3, KV80-3 and KV100-3 vacuum cleaner

Kiam 1821 high pressure pump complete with unloader valve.  Industrial high pressure pump, extremely high pressure and high volume.  Used for cleaning concrete, removal of rust and in commercial cleaning machines.  1450 RPM slow-revving model includes external by-pass unloader valve.  Will fit standard 24mm male engine drive shaft with 8mm keyway supplied. Features:Max. Pressure: 5200 PSI / 350 BarMax. Flow Rate: 23 Litres per minute1450 RPM slow-revving pump with external by-pass valveRequires 18.5 KW powerDimensions: (LxWxH) 34.5x30x22cmWeight: 18kg

Heavy duty Kiam trigger gun rated up to 250 Bar at 60°C with a stainless steel lance and 3 nozzle wash broom. Features a 3/8" (14.8mm) male quick release at the bottom of the gun to connect to a hose.

Bag for Kiam Sherwood BV-31 Leaf Blower / Vacuum

Replacement trolley base complete with rear wheels and front castors for Kiam KV30B vacuum cleaner

Replacement trolley base for Kiam KV30PT vacuum cleaner

Replacement rear wheel for Kiam KV30PT and KV30B vacuum cleaner

Replacement castor wheel for Kiam KV30PT / KV30B vacuum cleaner

Replacement 1.5m vacuum hose for Kiam KV30PT vacuum cleaner

Pump housing top cover for Aquarius Contractor

Pump housing base cover for Aquarius Contractor

Pump elbow coupling for Aquarius Contractor

Detergent pump 4-way coupling for Aquarius Contractor

Vacuum head plug socket cover for Aquarius Contractor

Replacement bags for the Kiam KVH-15 Vacuum Cleaner

1/2" DN15 female coupling each end, ideal as an inline water strainer for water inlets

Bosch bayonet to 1/4" male screw thread coupling.NOTE: Does NOT fit Bosch AQT / Aquatak range.

Nilfisk Alto bayonet to 1/4" female screw thread coupling. For Nilfisk / Alto domestic machines.

High pressure hose reel with fixed mounted base, direct hand crank rewind, locking mechanism, full flow swivel joint and short hose tail with 3/8" male screw connector. Includes a heavy duty 5/16" rubber high pressure hose rated up to 250 bar with 3/8" female screw threads on both ends.  Also features a heavy duty thick rubber cover sleeving to protect against being dragged along the floor, etc. SpecificationMax. Capacity: 30 metre 5/16" hose Max. Pressure: 250 Bar Max. Temperature: 70°C Inlet: 3/8" Male BSP Screw Thread Outlet: 3/8" Female BSP Screw Thread Base Mount Hole Dimensions: 8-13cm x 8.5cm

Will fit all pressure washers with a 22mm female screw coupling on the trigger gun outlet.  3 section extension lance up to 2.75m (9ft) with o'ring seal, comes fitted with M22 male screw thread on the inlet and a 11.6mm (1/4") quick release female coupling on the nozzle end.Note: nozzle is not included, you will require a 11.6mm (1/4") quick release nozzle