🚚 Express delivery available
Order by 12:00pm for next day delivery
📞 Get expert advice from real humans
Mon to Fri 7:30 to 16:00 Call 0151 548 5500
Optional Extras
Full Description
Domestic Pressure Washer Trigger Gun
M14 Inlet · M22 Female Outlet · 3000 PSI
A straightforward replacement trigger gun for most domestic pressure washers with an M14 male screw coupling on the hose. Rated to 3000 PSI (220 bar), 15 litres per minute and 60°C, with an M22 female outlet so your lance screws straight on.
Get your pressure washer back to work
A cracked handle, sticking trigger or leaking gun is one of the most common reasons a domestic pressure washer ends up sitting in the garage. In most cases the machine is fine. It's the gun that has worn out.
This replacement trigger gun screws onto your existing hose and takes your lance, so you can be cleaning the patio, car or garden furniture again without buying a whole new machine.
Key features
- Fits most domestic pressure washers – for machines whose hose has an M14 male screw coupling
- M22 female outlet – screw on a lance with an M22 male thread
- Rated to 3000 PSI (220 bar) – plenty of headroom for domestic machines
- Up to 15 litres per minute – handles the full flow of typical household pressure washers
- Up to 60°C – suitable for cold water and warm water machines up to 60°C
Check before you order
- Hose end: the end of your hose that connects to the gun must have an M14 male screw thread. Quick-release or click-fit hoses will not fit.
- Lance: your lance needs an M22 male screw thread to fit the outlet.
- Ratings: check your machine does not exceed 3000 PSI (220 bar), 15 l/min or 60°C.
Fitting tips
- Switch off and unplug the pressure washer, then squeeze the old trigger to release any trapped pressure.
- Unscrew the hose and lance from the old gun.
- Check the sealing O-rings on the hose and lance. Replace any that are flattened, cracked or missing.
- Screw the hose into the new gun's M14 inlet and the lance into the M22 outlet, hand-tight and secure.
- Turn on the water supply first, then the machine, and check all connections for leaks before you start cleaning.
Specification
| Product | Domestic pressure washer trigger gun |
|---|---|
| Inlet | Connects to hose with M14 male screw coupling |
| Outlet | M22 female screw thread (for lance) |
| Maximum pressure | 3000 PSI / 220 bar |
| Maximum flow | 15 litres per minute |
| Maximum temperature | 60°C |
| Suitable for | Most domestic pressure washers with an M14 male hose coupling |
Not sure it fits your machine?
Send us your pressure washer make and model, or a photo of your hose end, and we'll confirm the right gun for you.
Contact the equip2clean team