Pressure Washer Accessories

Carpet and upholstery cleaner detergent solution (5 litres).  Ideal for use with the Kiam Aquarius, Numatic, Karcher, Prochem, Rugdoctor carpet and upholstery machines.  A light, effective, low foaming carpet detergent for use with hot and cold water extraction machines.  Will emulsify soilage quickly and efficiently, leaving carpets fresh and clean.  Contains a Special additive to protect against mildew. To use, either spray directly onto the carpet or simply add a 280ml per litre of water to your clean water tank, add warm water to dilute and spray through the machine onto the carpet / upholstery.  Simple and easy to use 5 litre tub of concentrated detergent. Features:- Detergents- Degreaser- Anti-mildew- Optical Brightners- Anti-foam- Fragrance

High Pressure Spray Jet Nozzle with 15° fan - Stainless Steel 1/4" BSP male screw thread.  Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Heavy duty trigger gun with 14.8mm (3/8") quick release male coupling on the inlet and a 11.6mm (1/4") quick release female on the outlet.  Specification:Max. Pressure - 5070 PSI / 350 BarMax. Flowrate - 41 litres/minuteMax. Temperature - 150°C

Trigger handle housing/assembly for Aquarius Pro Valet / Contractor hose.  Includes: yellow trigger, trigger cover (left and right), handle and inner hose holder.

This coupling is commonly used for converting accessories (i.e. turbo nozzles) with a 1/4" female screw thread into a 11.6mm (1/4") quick release male.

Manufactured with a dual bearing and precision-ground tungsten stem and seat for maximum durability. Features:Heavy Duty Swivel Joint Housing for optimum maneuverabilityDouble ball-bearing system“Mink Flex System” Anti-Splash ringIncludes male 1/4" (11.6mm) quick release coupling to affix to a standard quick release lance Specification: Max Temp: 90°C / 194°F Max Pressure: 267 Bar / 4000 psi Flowrate: 1000 Litres/Hr Housing: 304 grade Stainless Steel Heavy Duty housing 12" / 300mm Inlet Coupling: 1/4" Male Quick Release Coupling Nozzles: Two * 025 Lechler 1/4 thread s/steel

Detergent pump for Aquarius Pro Valet and Contractor

Heavy duty industrial trigger gun with side handle and soft touch rubber grips rated up to 4000PSI (275 Bar) / 60°C.  Fitted with a 3/8" (14.8mm) male quick release connection to hose and a M22 female connection to a lance.  Includes 500mm lance with a 1/4" (11.6mm) female quick release outlet.  Also includes the best selling pressure washer accessory, the turbo nozzle.  Fantastic power and performance from this SPINNING NOZZLE which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

High Pressure Spray Jet Nozzle with 40° fan - Stainless Steel 1/4" BSP male screw thread.  Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Quick release pressure gauge, up to 600 bar pressure. Fits on outlet of pressure washer to hose giving a true pressure reading. Fits all Kiam 14.8mm (3/8") quick release couplings.

Heavy duty 10m industrial high pressure hose extension rated up to 220 bar (3200psi) at 60°C.  Has a 3/8" (14.8mm) female quick release on one end and a 3/8" (14.8mm) male quick release on the other.

Spare / replacement remote control for infrared heater

Ideal for use with Kiam Aquarius, Numatic, Karcher, Prochem, Rugdoctor carpet and upholstery machines.  Completely safe non-caustic detergent.   Will remove dirt/grime leaving it looking like new again with no dulling to the upholstery or colours.  To use simply 30g per litre to your clean water tank, add warm water to dissolve the powder and spray directly through the machine onto the carpet and upholstery. Features:- Detergents- Degreaser- Bacteriacide- Optical Brightners- Anti-foam- Fragrance

Replacement stainless steel detergent outlet coupling for the Aquarius Pro Valet / Contractor carpet cleaner.

12 Piece o-ring kit for pressure washer couplings on trigger gun, lance couplings, pressure pump outlet couplings and high pressure hose couplings. Includes two of each of the following:Yellow - OD14 / ID 8.6mmGreen - OD14 / ID 9.8mmRed - OD15.6 / ID 10mmBlue - OD18 / ID 12.7mmPump inlet filter washer steel mesh washerRubber is NBR70.

This light weight gutter vacuum cleaning pole kit allows you to safely work off the ground without the need for ladders.  Will fit most wet and dry vacuum cleaners as it comes supplied with a 38mm to 51mm and 45mm to 51mm hose adapters.  Used widely by professional gutter cleaners, window cleaners and handymen across the UK and Europe.  The pole system is manufactured from lightweight aerospace grade aluminium, a single 4' pole length weighs just 715 grams. (N.B.   These are not the flimsy thin poles some companies sell. Our poles are very robust and can stand up to everyday use by different operators) The dangerous traditional method of gutter cleaning is going up a set of ladders and to scoop the debris from the gutters using one hand while standing on the ladder holding on with the other hand that is also trying to hold a bag or bucket.  With this pole set combined with your wet and dry vacuum you can now access areas that where previously inaccessible and clean gutters safely and effectively. Blocked gutters will reduce or even stop water flow the water will build up and it will usually find it's way into the property causing expensive damage, blockages can build up in gutters usually in inaccessible places where people have been unable to clean like above conservatories, extensions, areas where the ground is unsuitable to place a ladder, this problem is eliminated with Kiams gutter vacuum pole systems with our pole sets combined with your wet and dry vacuum access is gained with ease and offers a cost effective solution to gutter cleaning. Works well when used with the recommended Kiam KV80-3 triple motor vacuum cleaner (not included) or the Kiam KV100-3 model too. In the box:10x 4ft (1.2m) Aluminium Poles9x Quick Release Clamps1x Jubilee Clip1x Aluminium Wide Nozzle1x Aluminium Narrow Nozzle1x Silcone U-Bend1x 38-51mm Hose Reducer1x 45-51mm Hose Reducer Specification:Max. Length: 12m / 40ftLength Per Pole: 1.2m / 4ftDiameter: 51mmWeight: 715g per pole

Will connect to all pressure washers with a 11.6mm (1/4") quick release connection on lance.  This is the industry standard fitting for most modern pressure washer nozzles, simply remove your lance nozzle and replace with this U-bend lance.  Your old nozzle then snaps into the end of this U-bend lance.

M22 male screw thread to 3/8" (14.8mm) quick release male coupling.  Can be used to connect guns, hoses and lances together. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

M22 male screw thread to 3/8" male screw thread coupling NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Stainless steel 1/4" (11.6mm) quick release high pressure 40 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance.  Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Replacement 5/16" flexible high pressure washer hose with braided reinforcement rated up to 220 bar with 3/8" female screw threads on both ends.  Features a heavy duty thick rubber cover sleeve to protect against being dragged along the floor, etc.  The hose is the HIGHEST QUALITY type hose for extra durability and long life. Specification:TYPE: 5/16" High Pressure Rubber Sleeved Reinforced Braided HoseMAX WORKING PRESSURE: 250 BAR / 3625 PSIMAX TEMPERATURE: 100CCOUPLING (TO MACHINE): 3/8" Female Screw ThreadCOUPLING (TO TRIGGER GUN): 3/8" Female Screw Thread NOTE: Please ensure these connections are compatible with your machine and gun.  Please also make sure that your pressure washer does not go over the max pressure and temperature rating of the hose.

3/8" male screw thread to 3/8" male screw thread coupling adapter

This coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a high pressure trigger gun (1/4" screw thread).

This coupling is commonly used for converting 1/4" screw thread nozzles into a 11.6mm (1/4") quick release nozzle.