Pressure Washer Accessories

This coupling is commonly used for converting 1/4" screw thread nozzles into a 11.6mm (1/4") quick release nozzle.

Set of 4 High Pressure Spray Jet Nozzle with 0° / 15° / 25° / 40° fan - Stainless Steel 1/4" BSP male screw thread.  Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

500mm pressure washer lance M22 male screw thread to a 1/4" (11.6mm) quick release outlet.  Will connect to all pressure washers with a M22 female thread connection on trigger gun.

Every pressure washer system, whether it is feeding by tap water, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader and nozzle clogged, and cause wear.  Stops grit, particles or debris from entering pump and causing costly blockages or pump wear.  400 micron stainless steel mesh, will fit 1/2" or 3/4" hoses.

Replacement lid / top cover for Aquarius Pro Valet

High pressure hose reel with fixed mounted base, direct hand crank rewind, locking mechanism, full flow swivel joint and short hose tail with 3/8 male screw connector. Designed to take up to 200ft / 60m high pressure hose (hose not included). SpecificationMax. Capacity: 200ft / 60 metre 3/8" hose Max. Pressure: 275 Bar Max. Temperature: 70°C Inlet: 3/8" Male BSP Screw Thread Outlet: 3/8" Female BSP Screw Thread Base Mount Hole Dimensions: 8-13cm x 8.5cm

Replacement carpet tool spray nozzle for Aquarius Pro Valet / Contractor.  Features blue quick release connector for the detergent pipe.

1000L IBC Water Tank - Includes tank, pallet and cage.  (Reconditioned - as New) Dimensions: Height: 1160mm Length: 1200mm Width: 1000mm

Stainless steel 1/4" (11.6mm) quick release high pressure 25 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance.  Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

M22 female screw thread to M22 female screw thread coupling.  Handy coupling used widely for connecting hoses together and Karcher guns to standard lances. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Replacement 3 metre detergent pipe for the vacuum hose / detergent pipe kit with male quick release coupling.

This socket will screw onto a M22 outlet on any K Series pressure washer without a reel and allow you to connect the newer type quick release Karcher K Series CLICK hose to it. Max. Pressure: 160 barMax. Temperature: 60°C

The best selling pressure washer accessory.  Fantastic power and performance from this spinning nozzle which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork.  The Turbo nozzle almost doubles the cleaning power.  Brilliant on block paving and for removal of moss and green algae.  Will fit all standard lances with 1/4” male threaded end or 1/4" (11.6mm) quick release outlet. Max. pressure 2900 PSI (200 bar) at 85°C. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Fits New Type - Nilfisk CORE domestic pressure washers. The Nilfisk Core series holds four new high-pressure models – 125, 130, 140, and 140 In-Hand Power control & 150 Power control. Comes with the Nilfisk bayonet coupling on the trigger gun end and a Nilfisk bayonet coupling for the machine end. Also features a heavy duty cover sleeving to protect against being dragged along the floor, etc. The hose is the HIGHEST QUALITY type hose for extra durability and long life.

High pressure hose reel with fixed mounted base, direct hand crank rewind, locking mechanism, full flow swivel joint and 3/8" male screw connector.  Designed to take up to 100ft / 30m high pressure hose (hose not included). SpecificationMax. Capacity: 100ft / 30 metre 3/8" hose Max. Pressure: 275 Bar Max. Temperature: 70°C Inlet: 3/8" Male BSP Screw Thread Outlet: 3/8" Female BSP Screw Thread Base Mount Hole Dimensions: 8.5cm x 8.5cm

For use with pressure washers with an M22 hose coupling.  The soft grip trigger gun is rated up to 4000 PSI (280 bar), 25 litres per minute at 150°C.  Comes with 500mm lance with 11.6mm (1/4") quick release outlet for nozzles.  Suitable for both hot water and cold water pressure washers. Overall length including gun is 1m long.

Kew Industrial bayonet to 1/4" male screw thread coupling.  For Nilfisk / Alto Industrial and Kranzle (D12 type coupling) machines.

3 metre vacuum hose complete with trigger handle and detergent pipe for the Aquarius Pro Valet.

High Pressure Spray Jet Nozzle with 0° fan - Stainless Steel 1/4" BSP male screw thread.  Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

This belt makes cleaning an easier and more comfortable experience by lessening the strain on your back, arm and shoulders.

Replacement 135 Degree Angled Head for Gutter Vacuum Pole Kit (51mm)

M22 male screw thread to 1/4" female screw thread coupling, widely used to connect 1/4" lances and accessories to M22 high pressure trigger guns. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Nozzle Holder coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a standard lance (1/4" screw thread).  Plastic shroud.

Ideal for removal of surface rust or paint on metal.  Attach the sand blast kit to your pressure washer and place the suction head into a bag of dry sand. The sand will be sprayed in solution with water.Adapters available to fit Bosch, Karcher K-series, Kew Industrial, Lavor and Nilfisk Alto pressure washers. 70 bar minimum, 160 bar maximum operating pressure.  To be used with 0.2-0.8mm grit sand.