RATED EXCELLENT ON TRUSTPILOT
EXPRESS DELIVERY AVAILABLE
Gorilla Power GPWP3D 3" Dirty / Clean Trash Water Pump
£399.00 Inc VAT
[£332.50 Ex VAT]
FULL DESCRIPTION
Gorilla Power GPWP3D — 3" Dirty/Clean TRASH Water Pump (Petrol, 208cc)
Built for flood water, pits, trenches and irrigation, the GPWP3D moves serious water fast — and doesn’t flinch at debris. It handles solids up to 28 mm, reaches a max head of 25 m, and delivers up to 45 m³/hr (≈ 750 L/min) with a reliable 208 cc 4-stroke engine.
🔎 Where This Model Sits in the Gorilla Power Pump Range
From compact clean-water transfer to high-throughput trash pumps — this 3″ GPWP3D is the heavy mover in the line-up.
💪 Performance at a Glance
Tip: Actual flow reduces as delivery height (head) increases and with hose friction. Keep suction runs short, airtight and with a straight path.
💡 Key Features
- Dirty & clean water compatible — handles solids up to 28 mm.
- 208 cc 4-stroke petrol — dependable cold starts & strong torque.
- High throughput — up to 45 m³/hr for rapid dewatering.
- Rugged frame — built to shrug off site knocks and transport.
- Quick to deploy — priming port and included strainer & hose fittings.
- Fuel shut-off — safer transit and maintenance.
🔌 Ports, Fittings & Controls
Use reinforced suction hose + clamps. Keep runs short & airtight.
Pairs well with 3″ lay-flat hose for rapid outflow.
Simple controls; close the fuel valve for transport.
🧭 Application Guide
| Medium | Typical solids | GPWP3D suitability |
|---|---|---|
| Pool / clean tank water | None | ✅ Easy |
| Flood water (mud/leaves) | ≤ 20 mm | ✅ Yes |
| Pond / irrigation channels | ≤ 25 mm | ✅ Yes |
| Trenches / foundations | ≤ 28 mm | ✅ Yes (trash-capable) |
| Sand-laden water | Fine–coarse | ✅ OK (abrasion aware) |
Not for thick slurries, oils or chemicals. Always check compatibility and solids size before use.
🧠 Setup & Use Tips
- Prime before starting — fill pump housing with clean water to protect seals.
- Suction best-practice — keep suction hose short, straight and airtight with a foot valve/strainer.
- Head vs flow — higher discharge height = lower flow; use the largest practical hose.
- Maintenance — rinse after dirty jobs; inspect strainer and replace worn seals promptly.
- Fuel & storage — close fuel valve; store dry and frost-free.
📊 Technical Specifications
| Model | GPWP3D |
| Inlet / Outlet | 3″ (80 mm) |
| Engine | 4-stroke petrol, 208 cc |
| Suction Height (max) | 7 m |
| Total Head (max) | 25 m |
| Flow (max) | 45 m³/hr (≈ 750 L/min) |
| Solids Handling | Up to Ø 28 mm |
| Dimensions (L×W×H) | 605 × 455 × 450 mm |
| Net Weight | 38.5 kg |
🛡️ Warranty
- Domestic use: 3-year limited
- Commercial use: 12-month limited
- Proof of purchase required. Exclusions apply.
CUSTOMER REVIEWS
