🚚 Express delivery available
Order by 12:00pm for next day delivery
📞 Get expert advice from real humans
Mon to Fri 7:30 to 16:00 Call 0151 548 5500
Full Description
0° High Pressure Spray Nozzle – Stainless Steel, 1/4" BSP Male
A pinpoint jet for maximum impact on the toughest dirt. Fits all standard 1/4" BSP female lances.
This stainless steel 0° high pressure spray nozzle concentrates the full force of your machine into a single pinpoint jet. Use it for the hardest cleaning jobs: blasting out cracks and joints, shifting dried-on concrete and mortar, cleaning tracks and machinery, and reaching dirt from a distance. The 1/4" BSP male thread is the standard European fitting, so it screws straight into any 1/4" BSP female lance.
Key Features
- 0° pinpoint jet – maximum impact for the most stubborn dirt and deposits
- Long reach – the solid jet carries further than a fan spray
- Stainless steel – hard-wearing and corrosion resistant for a longer working life
- 1/4" BSP male thread – standard European fitting for 1/4" BSP female lances
- Range of sizes – match the nozzle to your machine's pressure and flow for best performance
Safety note: the 0° jet is extremely powerful. Never point it at people, animals or skin. Avoid using it on timber, render, paintwork, vehicles and other softer surfaces, as it can easily cause damage. For general cleaning, use a 15°, 25° or 40° nozzle.
Specifications
- Spray angle: 0° (pinpoint jet)
- Material: Stainless steel
- Thread: 1/4" BSP male
- Fits: All 1/4" BSP female lances (standard European supply)
Choosing the Right Nozzle Size
Use the nozzle size chart below to pick the correct nozzle for your pressure washer:
- Find your machine's pressure (bar) column.
- Slide down until you reach the figure nearest your machine's flow (litres/min).
- Read across to the green column for your nozzle size.
- Choose the spray angle that best suits the job.
Example: for a machine rated at 100 bar and 11 L/min, start at the 100 bar column and slide down to the nearest figure, 11.3. The green column shows a 05 nozzle.
Converting PSI to bar: divide the PSI figure by 14.5 (for a quick estimate, divide by 15).
Not Sure Which Nozzle Size You Need?
Send us your machine's pressure and flow, and our team will tell you the right nozzle.
Contact the equip2clean TeamHigh Pressure Spray Jet Nozzle 0° Stainless Steel 1/4" BSP
You May Also Like
