Nozzles / Jets
59 products
Showing 1 - 24 of 59 products

£5.45
1/4" (11.6mm) quick release 65 degree detergent nozzle to allow application of detergent / chemical with your pressure washer.
£5.45

£5.45
Stainless steel 1/4" (11.6mm) quick release high pressure 40 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance. Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
Stainless steel 1/4" (11.6mm) quick release high pressure 25 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance. Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
Stainless steel 1/4" (11.6mm) quick release high pressure 15 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance. Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
Stainless steel 1/4" (11.6mm) quick release high pressure 0 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance. Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
High Pressure Spray Jet Nozzle with 0° fan - Stainless Steel 1/4" BSP male screw thread. Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
High Pressure Spray Jet Nozzle with 15° fan - Stainless Steel 1/4" BSP male screw thread. Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
High Pressure Spray Jet Nozzle with 25° fan - Stainless Steel 1/4" BSP male screw thread. Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.45
High Pressure Spray Jet Nozzle with 40° fan - Stainless Steel 1/4" BSP male screw thread. Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£5.45

£5.95
Low pressure chemical spray jet nozzle size with 65° fan - Brass 1/4" BSP. Fits all 1/4" BSP female lances.
£5.95

£8.95
Turbo nozzle for Karcher K Series pressure washers to fit non-original lance.Note: This does not the standard original K-Series lance
£8.95

£8.95
Vario nozzle for Karcher K Series pressure washers to fit non-original lance.Note: This does not the standard original K-Series lance
£8.95

£8.95
Professional drain cleaning nozzle for industrial use. Steel bullet head with 1 forward facing jet and 3 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way. Max. working pressure 3000 PSI / 200 Bar up to 20 litres / minute. 045 nozzle size (0.70mm diametre nozzle). 1/8" female screw thread connection.
£8.95

£9.95
This coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a standard lance (1/4" screw thread). Plastic shroud.
£9.95

£9.95
Professional drain cleaning nozzle for industrial use. Steel bullet head with 1 forward facing jet and 3 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way. Max. working pressure 5500 PSI / 380 Bar up to 36 litres / minute. 045 nozzle size, 0.70mm diameter nozzle. 1/4" female screw thread connection.
£9.95

£10.95
This coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a standard lance (1/4" screw thread).
£10.95

£10.95
This coupling is used for connecting 11.6mm (1/4") quick release high pressure nozzles to a high pressure trigger gun (1/4" screw thread).
£10.95

£11.94
Professional drain cleaning nozzle for industrial use with 3 rear facing jets. Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute. The rear facing nozzles spin (corkscrew) to help clean out the drains. With 3 rear facing jets, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 100 Bar to 280 Bar up to 36 litres / minute flowrate. Nozzle size 045 with 1/4" female screw thread connection.
£11.94

£11.98
Not a fan jet. 1/4" (11.6mm) quick release detergent nozzle to allow use of detergent / chemical with your pressure washer. This nozzle is designed to give a straight soap spray to those hard to reach areas. No need for ladders or climbing to reach up. Can be used with pressure washers up to 4000psi.
£11.98

£11.98
1/4" (11.6mm) quick release spray nozzle, low pressure (BLUE) straight jet 0 degree. This nozzle is designed to give a STRAIGHT SPRAY to those hard to reach areas, ideal for reaching under gutters and fascias. Can be used with pressure washers up to 4000psi.
£11.98

£11.99
Professional drain cleaning nozzle for industrial use. Steel bullet head with 1 forward facing jet and 3 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way. Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute. 1/4" male screw thread connection.
£11.99

£12.95
Turbo and vario nozzle for Karcher K Series pressure washers to fit non-original lance. Note: This does not the standard original K-Series lance
£12.95

£13.95
11.6mm (1/4") quick-release high pressure nozzle jets to fit on any standard 11.6mm (1/4") quick release nozzle holder / lance. Set Includes:1x 00 needle / pencil nozzle for directional spray1x 15 degree nozzle for narrow spraying1x 25 degree nozzle for medium fan spray1x 40 degree wide angle fan spray1x 65 degree low pressure detergent nozzle Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs.Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.
£13.95

£13.95
Professional Drain cleaning NOZZLE for Industrial use with 3 rear facing jets. Max. working pressure 4000 PSI / 280 Bar up to 25 litres / minute. With 3 rear facing jets, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 100 Bar to 280 Bar up to 25 litres / minute flowrate. Nozzle size 045 with 1/8" female screw thread connection.
£13.95
Recently viewed
Keep up to date
Enter your email below to receive special offers, exclusive discounts and more!
