
£5.95
12 Piece o-ring kit for pressure washer couplings on trigger gun, lance couplings, pressure pump outlet couplings and high pressure hose couplings. Includes two of each of the following:Yellow - OD14 / ID 8.6mmGreen - OD14 / ID 9.8mmRed - OD15.6 / ID 10mmBlue - OD18 / ID 12.7mmPump inlet filter washer steel mesh washerRubber is NBR70.

£6.95
Plastic detergent mesh filter designed to stop grit, particles or debris from entering pump and causing costly blockages or pump wear. Features brass weighted bottom to ensure the pipe sinks to the bottom of the detergent bottle. 1/4" 6mm hose barb, 55mm long.

£7.99
Every pressure washer system, whether it is fed by tap water, or from A water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. This can be fitted either directly onto a tap or on the pressure washer inlet. Features:Clear bowl material nylonConnection: 3/4" Female Screw Thread to Male HozelockCold water use onlyMax Pressure: 175 psi

£8.99
Detergent pipe filter designed to stop grit, particles or debris from entering pump and causing costly blockages or pump wear. Features non-return valve. 1/4" 7mm hose barb 40mm long.

£9.95
3/4" DN20 female coupling each end, ideal as an inline water strainer for water inlets

£9.95
1/2" DN15 female coupling each end, ideal as an inline water strainer for water inlets

£11.99
Every pressure washer system, whether it is fed by tap water or from a water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. The stainless steel mesh together with the weighted base means that the filter will sit at the bottom of the water source preventing grit, particles or other debris from entering the pressure washer pump. Features:- Suitable for hoses with hozelock connector- 500 micron removable stainless steel mesh- Total length of 11.5cm- 80mm diameter base- Max pressure 80 psi- Max temperature 60°C

£12.95
Detergent hose pipe (1m) and filter for pressure washer.

£13.95
Every pressure washer system, whether it is fed by tap water, or from A water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. This can be fitted either directly onto a tap or on the pressure washer inlet. Features:Clear bowl material nylonConnection: 3/4" BSP Male/Female Screw ThreadCold water use onlyMax Pressure: 80 psi

£13.95
Every pressure washer system, whether it is fed by tap water, or from A water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. This can be fitted either directly onto a tap or on the pressure washer inlet. Features:Clear bowl material nylonConnection: 3/4" Male/Female BSP screw threadCold water use onlyMax Pressure: 175 psi

£13.95
Detergent pipe filter designed to stop grit, particles or debris from entering pump and causing costly blockages or pump wear. Features Non Return Valve. Brass 1/4" 6mm hose barb 55mm long.

£14.95
Every pressure washer system, whether it is fed by tap water or from a water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. The stainless steel mesh together with the weighted base means that the filter will sit at the bottom of the water source preventing grit, particles or other debris from entering the pressure washer pump. Features:- Suitable for hoses with 1/2" or 3/4" bore- 500 micron removable stainless steel mesh- Total length of 147mm- 80mm diameter base- Max pressure 80 psi- Max temperature 60°C

£14.99
Every pressure washer system, whether it is feeding by tap water, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader and nozzle clogged, and cause wear. Stops grit, particles or debris from entering pump and causing costly blockages or pump wear. 400 micron stainless steel mesh, will fit 1/2" or 3/4" hoses.

£15.85
Protects the system from contaminants in the water. Built from stainless steel material. Easy to clean. Specification:Filter Type: 100 Mesh ScreenMax. Pressure: 5500 PSIMax. Temperature: 90°CInlet: 1/4" female screw threadOutlet: 1/4" male screw thread

£16.99
Protects the system from contaminants in the water. Built from stainless steel material. Easy to clean. Specification:Filter Type: 100 Mesh ScreenMax. Pressure: 5500 PSIMax. Temperature: 90°CInlet: 11.6mm (1/4") male quick releaseOutlet: 1/4" male screw thread

£18.95
Every pressure washer system, whether it is fed by tap water, or from A water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. Prevent debris from getting into the pump with this filter. Features:Clear polycarbonate bowl with stainless steel meshConnection: 3/4" Brass Female Screw ThreadCold water use onlyMax Pressure: 80 psi

£18.95
Every pressure washer system, whether it is fed by tap water, or from A water tank, stream or pond should have a quality water filter installed on the inlet side of the pump. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear. Prevent debris from getting into the pump with this filter. Features:Clear polycarbonate bowl with stainless steel meshConnection: 1/2" BSP Female Screw ThreadCold water use onlyMax Pressure: 80 psi

£23.95
Suck water from a bowser or standing source with this flexible 3m suction hose and filter