The Lavor SCL Easy-R 66 BT Walk-Behind Scrubber-Dryer is the answer to all your hard floor cleaning problems. It is designed for Commercial cleaning tasks in Warehouses, food production areas, and large, flat flooring spaces. It works well on all tiled floors, concrete floors, painted floors, linoleum, and will even clean undulating & grooved floors.
It works by injecting the detergent solution through the fast scrubbing brushes, and at the same time, the rubber squeegee blades allow the dirty solution to be vacuumed away to the recovery tank.
Equipped with...
- Suitable to work for the maintenance and deep cleaning of large areas (up to 2,200 m²).
- Covers removable without tools, provided with self-locking system.
- Quick vacuum motor and filter inspection without tools.
- Detergent solution tank with a large opening protected by a quick-locking cap.
- Parking brake directly on the wheel.
- Non-marking wheels.
- Easy squeegee regulation without tools.
- Movable shock-proof squeegee.
- General ON/OFF switch and key switch, brush and vacuum motor switch.
- Thermal circuit breaker to protect the vacuum motor and brush motor, battery level control, hour meter.
- Easy access to battery and vacuum motor compartment, without using tools.
- Large tank capacity, at the top in its category (67 L).
- 2 x 12V -118 Ah C5 batteries to grant long work autonomy, up to 3 hours.
- Control lever for brush operation and detergent water outflow.
- Recovery tank drain hose.
- Quick battery charger plug fitting.
- 15 mm Heavy-duty steel monobloc brush plate.
- Great pressure on the floor for deep cleaning, even on the toughest dirt.
- Self-levelling system.
- Solenoid valve to stop detergent water outflow during work interruptions.
Other useful information
Number of disc brushes:
The scrubbing group meets different cleaning path needs with 1, 2, or 3 disc brushes.
Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduces chemical consumption and prevents solution waste. The flow is open only when the brush is working, so there are no accidental leaks when the machine is stopped. The system is protected by a filter with easy maintenance.
Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.
Charge meter and battery protection:
It informs when the autonomy is finishing, allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damage to the batteries by avoiding complete discharge with any kind of technology.
Applications pads:
BEIGE PAD - POLISHING:
Polyester to polish all kinds of floors. Use dry.
GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon to remove old superficial wax, leaving floors ready to be recoated. Use wet.
BLACK PAD - WET STRIPPING:
Nylon for wet stripping of heavy layers of wax. Ideal for removing old floor finishes, scuff marks, and cement stains.
