Weighted Water Suction Filter (1/2" & 3/4" Barb)

Every pressure washer system, whether it is fed by tap water or from a water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.  By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. The impurity will get into the pump and cause the unloader or nozzle to clog, and cause wear.

The stainless steel mesh together with the weighted base means that the filter will sit at the bottom of the water source preventing grit, particles or other debris from entering the pressure washer pump.

Features:
- Suitable for hoses with 1/2" or 3/4" bore
- 500 micron removable stainless steel mesh
- Total length of 147mm
- 80mm diameter base
- Max pressure 80 psi
- Max temperature 60°C