Pressure Washer Lances

For use with pressure washers with an M22 hose coupling.  The trigger gun is rated up to 4500 PSI (310 bar), 30 litres per minute at 150°C.  Suitable for both hot water and cold water pressure washers.

80" (2000mm) steel lance with 1/4" quick release nozzle connector and M22 male screw thread inlet coupling.

For use with most domestic type pressure washers with an M14 Male screw coupling.  The trigger gun is rated up to 2750 PSI (180 bar), 25 litres per minute at 60°C.  Complete with a 500mm lance and a variable nozzle with a twist grip to alter the width of spray fan and push / pull to apply detergent.

Pressure washer lance with 1/4" BSP male screw thread on both ends with insulated cover for use with steam cleaner. Suits all 1/4" standard thread trigger guns and accessories.  Length: 36" / 900mm

  @aquacleansepro #aquacleanse ♬ Would You (go to bed with me?) - Campbell & Alcemist   Introducing the innovative Aquaspray® Rotary Solar/Roof Panel Cleaning Brush, equipped with an 18ft Telescopic Lance, designed to revolutionize the way you clean solar panels. This high-performance cleaning tool harnesses the power of your pressure washer to drive the soft brush at high speeds, delivering an unmatched spinning force that efficiently removes dirt and debris from the surface of your solar panels. The Aquaspray® brush is ingeniously designed to connect to the aluminium telescopic wand, comprising four sturdy poles that extend up to 18 feet. This feature ensures you can reach high and difficult areas with ease. The wand is fitted with a protruding ring at the end to prevent over-extension, safeguarding the mechanism and ensuring long-term durability. Durability and ease of use are at the forefront of the Aquaspray® design, featuring a robust nylon joint and lever system complemented by an anti-loose clamp design that guarantees a secure and stable operation throughout its use. The professional trigger gun is another highlight, offering a continual working lock that enhances the user experience, especially during extended cleaning sessions. The brush is built to withstand the rigors of cleaning, with a maximum temperature tolerance of 60°C (140°F) and a maximum pressure capacity of 3200 PSI (220 Bar). This makes it suitable for a wide range of pressure washers. The M22 male inlet fitting ensures compatibility with most standard pressure washers, providing a seamless and hassle-free connection. Other adapters are available. Whether you're a professional cleaner looking to enhance your service offerings or a diligent homeowner seeking to maximize the efficiency of your solar panels & windows, the Aquaspray® Spinning Solar Panel Cleaning Brush with its 18ft Telescopic Lance is the ultimate tool for maintaining clean and efficient solar panels. Widely used for cleaning Solar panels, Windows, uPVC panels, facia boards, steel panel roofing & slate roofing. BRUSH WIDTH: 32cm / 12 1/2" BRUSH: Soft nylon Bristles HEAD: Adjustable 3 position angled head, 0 - 45 degrees LANCE: 18' Telescopic 4 pole lance GUN INLET: M22 male screw thread HARNESS:  Shoulder harness included

4in1 multi-nozzle lance features a rotary turbo nozzle, wide fan jet, needle jet and detergent nozzle.  Easily switch between each nozzle with a quick twist of the lance. Specification:Max. Pressure: 2000 psi / 140 barMax. Flow Rate: 12 litres / minuteMax. Temperature: 60°C

🚀 Introducing the Tema Male Soft-grip Gun and Lance Bundle: Your Ultimate Time-Saving Tool for Pressure Washing 🚀 Unlock a faster and more efficient cleaning experience with our all-new Tema Male Soft-grip Gun and Lance combo. Equipped with a TEMA Male Quick Release feature, this set seamlessly connects to any female quick-release TEMA hose, ensuring you're up and running in no time. 🔍 Choose Your Lance Size: 📏 900mm 📏 1200mm 📏 1500mm 📏 2000mm 🌟 Standout Features: 🔗 Quick Connect & Release: With a 1/4 quick-release outlet at the lance's end, switching between nozzles is a breeze. No more downtime - just snap in your 1/4 male quick-release nozzles and power through your cleaning tasks. The Gun also comes featured with a TEMA male quick release coupling to connect to your TEMA quick release Female hose. 🔄 Enhanced Compatibility: Our 900mm lance is versatile. With an M22 male screw thread, it connects effortlessly to all pressure washers with an M22 female thread connection on the trigger gun. 💨 Safe for Steam Cleaning: The lance boasts an insulated cover, making it ideal for use with steam cleaners. 📋 Specifications You Can Trust: Gun Specification: 💧 Max. Pressure: 5000 PSI / 345 Bar 🌊 Max. Flowrate: 40 litres/minute 🔥 Max. Temperature: 150°C Lance Details: 📏 Length: 900mm 🔩 Connection: M22 male screw thread to a 1/4" (11.6mm) quick release outlet. Whether you're a professional cleaner or just looking to optimize your home pressure washing tasks, this gun and lance set is the game-changer you've been waiting for. Boost your efficiency, reduce effort, and achieve pristine results with every use. 🌟

Replacement trigger gun with variable lance to suit Lavor pressure washers. SpecificationMax. Pressure: 1500 PSI / 100 BarMax. Flowrate: 8 litres per minuteInlet: 1/4" Male BSP screw thread  

Twin lance with side handle (high / low pressure) stainless steel 700mm long lance.  Suitable for hot and cold pressure washers where the pressure needs to be adjusted from high to low pressure.  M22 male screw thread inlet and two 1/4" bsp female screw thread nozzle holder outlets.  Rated to a maximum of 280 bar at 180°C.Note: Nozzles not included

Kiam trigger gun and 500mm lance rated up to 250 Bar at 60°C.  It has a 3/8" (14.8mm) male quick release connector at the bottom of the gun to attach to a hose and a 1/4" (11.6mm) female quick release outlet at the end of the lance to attach a quick release nozzle.Nozzles Included:One * 00 needle / pencil nozzle for directional sprayOne * 15 degree nozzle for narrow sprayingOne * 25 degree nozzle for medium fan sprayOne * 40 degree wide angle fan sprayOne * 80 degree low pressure detergent nozzleOne * Turbo nozzle

900mm pressure washer lance M22 male screw thread to a 1/4" (11.6mm) quick release outlet.  Will connect to all pressure washers with a M22 female thread connection on trigger gun.

The 12.5m / 42ft OVA8® power pole represents a significant advancement in cleaning technology, particularly for high-pressure applications. Its unique design and high-pressure capability of up to 4000psi (or 276 bar) make it a versatile tool for reaching and cleaning areas that are typically difficult to access. This is especially valuable for buildings, windows, and other structures where traditional methods might not suffice or could pose safety risks. One of the standout features of the OVA8® pole is its anti-spin section. This design innovation means that the oval-shaped clamps need only prevent the pole sections from moving vertically, reducing the workload on these components and potentially extending the pole's lifespan. The oval shape also contributes to greater rigidity and control, as it fits more naturally in the hands of the operator, allowing for a more ergonomic grip that can reduce fatigue during extended use. The adaptability of the pole to high-pressure cleaning while remaining user-friendly is a notable achievement. The easy adjustment mechanisms and comfortable handle design support operators in efficiently cleaning hard-to-reach areas without the excessive strain that can come from using less sophisticated equipment. This ergonomic consideration is crucial for preventing injuries and ensuring that operators can work more comfortably for longer periods. Constructed from high-quality carbon fibre and stainless steel components, the OVA8® pole is built to withstand heavy use and harsh conditions. Its durability and robustness mean that it's not just a tool but a long-term investment in efficient and effective cleaning. By eliminating the need for additional equipment like ladders or scaffolding, which can be expensive and time-consuming to set up, the pole offers a cost-effective solution to a wide range of cleaning challenges. Key Features Water Pressure Compatibility: It can handle water pressure up to 4000psi or 276bar, making it suitable for heavy-duty cleaning tasks where high water pressure is required to remove dirt, grime, and other stubborn residues from surfaces. Extended Reach: The pole can extend up to 42 feet (approximately 12.8 meters), providing access to high and hard-to-reach areas without the need for ladders, scaffolding, or other elevation aids, enhancing safety and efficiency. Anti-Twist Technology: Incorporates an anti-twist feature that prevents the pole sections from rotating during use. This ensures consistent performance and reduces the wear and tear on the clamps and sections, enhancing the pole's durability. Lightweight Construction: Made from carbon composite materials, the pole is lightweight, making it easier to handle and maneuver, which reduces operator fatigue during extended use. Rigidity and Control: The design offers increased rigidity and better control over the cleaning process, ensuring precise and efficient cleaning performance even at full extension. Pole Specifications Material: The pole is made from 100% carbon composite, equipped with a glass fiber handle for enhanced grip and comfort. Sections: It consists of 8 sections, allowing for adjustable length according to the cleaning task requirements. Minimum Length: When fully retracted, the pole measures 2320mm or 2.32 meters, making it compact for storage and transport. Achievable Height: The pole extends to an impressive height of 42 feet, facilitating the cleaning of tall structures without compromising safety. Weight: Weighing in at 7.2kg, it strikes a balance between durability and ease of use, ensuring it can be used for prolonged periods without excessive strain. Trigger and Hose Attachment: Features a sturdy trigger attached firmly to the pole section, complete with a hose swivel and quick release fitting for easy hose management and water flow control. Pressure/Temperature Rating: It is rated for high pressure up to 276bar and temperatures up to 100°C, making it versatile for various cleaning environments and conditions. Clamp System: Utilizes the OVA8® clamp system, designed to securely lock pole sections in place and prevent slippage during operation. This comprehensive set of features and specifications underscores the 42ft OVA8® power pole's suitability for a wide range of cleaning scenarios. Its design emphasizes safety, efficiency, and effectiveness, making it an excellent investment for professional cleaning services looking for a reliable, high-performance tool. N.B. This lance does not fit onto domestic brand pressure washers i.e. KarcherN.B. Coupling on trigger gun is 3/8" bsp female screw thread.N.B. Excludes nozzles

Side handle to fit onto heavy duty industrial high pressure trigger gun lance.  With 6mm male thread - screws into lance.

3.6m (12') telescopic lance for use with mobile pressure washers used for cleaning house facades, windows, guttering, fascias, brickwork, high sided vehicles and machinery.  This two section, innovative design retracts to a more manageable size and allows for easier field maintenance.  Features socket lock system on the poles for strength and durability. Work from the safety of the ground as  there is no need for the use of expensive scaffolding or ladder systems, simply clip on the gun to the high pressure hose and start cleaning. Features: 3.6m fully extended (two section) 2m fully retractedCan be used with both hot and cold pressure washers Max. 4000 PSI (275 bar) up to 90°C at 23 lpm Comes complete with high pressure wash gun fitted Manufactured in fibreglass and aluminium for lightness and durability N.B. This lance does not fit onto domestic brand pressure washers i.e. Karcher N.B. Coupling on trigger gun is 14.8mm (3/8") quick release male, please make sure you have the correct coupling on your hose N.B. Requires 1/4" BSP nozzle (not included)

Pressure washer lance with 1/4" BSP male screw thread on both ends with insulated cover for use with steam cleaner. Suits all 1/4" standard thread trigger guns and accessories.  Length: 80" / 2000mm

Heavy duty industrial trigger gun with side handle and soft touch rubber grips rated up to 4000PSI (275 Bar) / 60°C.  Fitted with a 3/8" (14.8mm) male quick release connection to hose and a M22 female connection to a lance.  Includes 500mm lance with a 1/4" (11.6mm) female quick release outlet that the 4 nozzle wash broom will connect on to.

Karcher HD & HDS industrial type 870mm vented lance with tip retainer nozzle holder.  Rated up to 5800 PSI, has a M22 female screw thread inlet.Note: Jet tip not included

24" (600mm) lance with a detergent nozzle and a 1/4" quick release nozzle connector to suit push in nozzles.  Features a brass high-low switch valve with handle to allow quick change between high and low pressure application. The lance comes pre-fitted with a brass detergent nozzle, does not include high pressure nozzle for quick release outlet.  Suits trigger guns with standard M22 female screw thread, rated up to 4000 PSI.

Stainless steel 500mm lance with M22 male screw thread and 11.6mm (1/4") female quick release couplings.Stainless steel 11.6mm (1/4") Snap-On (Quick-release) high pressure nozzle jets. These jets fit the US design and Chinese pressure washers - where they simply snap into the end of the lance.Nozzles Included:One * 00 needle / pencil nozzle for directional sprayOne * 15 degree nozzle for narrow sprayingOne * 25 degree nozzle for medium fan sprayOne * 40 degree wide angle fan sprayOne * 80 degree low pressure detergent nozzleOne * Turbo nozzle

High pressure lance with an adjustable angled 1/4" (11.6mm) quick release nozzle holder to M22 screw thread.  Will connect to all pressure washers with a M22 female thread connection on trigger gun.  Adjusts 90 degrees to three different cleaning angles, ideal for those hard to reach areas. SpecificationMax. working pressure: 4000psi (270 bar)Length: 900mm (36")

Gutter u-bend lance with twin 1/4" (11.6mm) female quick release outlets, designed to jet water in both directions along a gutter pipe to clear out gutters.  Will connect to all pressure washers with a 1/4" (11.6mm) quick release connection on the lance.NOTE: Does not come with nozzles.

Pressure washer lance with 1/4" BSP male screw thread on both ends with insulated cover for use with steam cleaner. Suits all 1/4" standard thread trigger guns and accessories.  Length: 60" / 1500mm

Will connect to all pressure washers lances at the 1/4" (11.6mm) quick release connector.  This lance is fitted with a 1/4" (11.6mm) quick release male inlet and a 1/4" (11.6mm) quick release female outlet.

 PREMIUM GRADE CARBON FIBRE TELESCOPIC LANCE WITH 5 ASSORTED NOZZLE ATTACHMENTS, STRAIGHT & 'U' BEND LANCE EXTENSION PLUS FREE BELT HARNESS! Introducing our latest addition to the Equip2clean family - the Carbon Fibre 5.4m Telescopic Lance! Designed to provide you with the ultimate cleaning experience, this premium-grade lance is crafted using lightweight carbon fibre, ensuring easy handling during operation. Our 5.4m (17.7') telescopic lance comes equipped with 5 assorted nozzle attachments, a straight & 'U' bend lance extension and a free belt harness. This means you can tackle any cleaning task with ease, from cleaning house facades, windows, guttering and fascias to high-sided vehicles and machinery. Extremely light! Weighing only 2.3kg, this 4-section pole is an arm saver for professional cleaners.  With its innovative four-section design, this telescopic lance is easily retractable to a more manageable size, allowing for easy transportation to and from the site. The robust clamp lock system on the poles adds an extra layer of strength and durability, ensuring long-lasting use. Invest in the Carbon Fibre 5.4m Telescopic Lance for a hassle-free and effective cleaning experience. Product Specifications Max Pressure 4000PSI / 280 Bar Max Temperature 60°C / 140°F Max Flow 25 Litres Per Minute