Jet Nozzles for Pressure Washers

Professional drain cleaning nozzle for industrial use.  Steel bullet head with 1 forward facing jet and 3 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way.  Max. working pressure 5500 PSI / 380 Bar up to 36 litres / minute.  050 nozzle size, 0.75mm diameter nozzle.  3/8" female screw thread connection.

Professional drain cleaning nozzle with wiggly end, ideal for eating away at obstructions in pipe.  The front nozzle hits the back of the brass tip and the spring allows the tip to WIGGLE and help remove the obstruction.  Brass bullet head with 1 forward facing jet and 3 rear facing 15 degree jets.  Max. working pressure 3600 psi / 220 bar.

Professional drain cleaning nozzle for industrial use with 3 rear facing jets. Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute. The rear facing nozzles spin (corkscrew) to help clean out the drains.  With 3 rear facing jets, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 160 Bar to 280 Bar up to 36 litres / minute flowrate.  Nozzle size 050 with 3/8" female screw thread connection.

Professional drain cleaning nozzle for industrial use.  Steel bullet head with 1 forward facing jet and 8 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way.  Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute.  3/8" male screw thread connection.  

Spray tip retainer for Karcher HD / HDS commercial steam cleaners and pressure washers.  Includes holder and the 1/4" female screw thread adapter to fit onto a 1/4" threaded lance.

Domestic Turbo Nozzle (NOT FOR INDUSTRIAL SPEC. MACHINES) Fantastic power and performance from this SPINNING NOZZLE which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork. The Turbo nozzle almost DOUBLES THE CLEANING POWER. WILL FIT all standard lances with 1/4” male threaded end and includes a male quick release adaptor.  Max. temperature 85°C.  Max. pressure 2200PSI / 150 Bar. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs.Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

11.6mm (1/4") quick-release high pressure nozzle jets to fit on any standard 11.6mm (1/4") quick release nozzle holder / lance. Set Includes:1x 00 needle / pencil nozzle for directional spray1x 15 degree nozzle for narrow spraying1x 25 degree nozzle for medium fan spray1x 40 degree wide angle fan spray1x 65 degree low pressure detergent nozzle Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs.Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Wheel wash brush for Karcher K series pressure washer connects to all Karcher K series pressure washers with a bayonet connector to the lance.  Widely used by valetors as a hand brush and also connected to a pressure washer for cleaning the inside of alloy wheels.  Features soft bristle brush and Karcher male bayonet connector.

DOMESTIC Turbo Nozzle (NOT FOR INDUSTRIAL SPEC. MACHINES) Fantastic power and performance from this SPINNING NOZZLE which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork. The Turbo nozzle almost DOUBLES THE CLEANING POWER. WILL FIT all standard lances with 1/4” male threaded end.  Max. pressure 2200PSI / 150 Bar. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs.Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Twin nozzle jet holder 1/4" female screw thread to 2x 1/4" female screw threads, can be fitted straight onto the end of a standard 1/4" lance.  This is used when two different nozzle sizes or different width fan jets are required for different jobs.  Simply with a flick from side to side you change from one nozzle to the other. Note: Requires nozzle (not included)

Professional drain cleaning nozzle for industrial use. Steel bullet head with 1 forward facing jet and 8 rear facing jets. Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute.  With one forward facing jet and 8 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way.  Ideal for pressure washers from 160 Bar to 280 Bar up to 36 litres / minute flowrate.  Nozzle size 050 with 3/8" (14.8mm) male quick release connection.

Professional drain cleaning nozzle for industrial use. Max. working pressure 4000 PSI / 280 Bar up to 36 litres / minute. The rear facing nozzles spin (corkscrew) to help clean out the drains, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 160 Bar to 280 Bar up to 36 litres / minute flowrate.  Nozzle size 050 with 3/8" (14.8mm) male quick release connection.

11.6mm (1/4") quick release male 6in1 adjustable spray nozzle can be used with pressure washers up to 3300psi (nozzle size 035).  Features 4 high pressure nozzles (0 degree / 15 degree / 25 degree / 40 degree) and 2 low pressure nozzles (wide angle soap nozzle / narrow long reach jet). Multipattern Spray Nozzle features Select-A-Spray saving time and money by combining six of the most-used spray patterns in one durable aluminum nozzle.  No more switching from one nozzle to the next. Simply dial in the right spray pattern the job.  Simple and fast changeover of nozzles with a quick rotation for spot cleaning, rinsing and detergent application.  Spray patterns 0°, 15°, 25°, 40°, soap spray and rinse.

1/4" female screw thread 5in1 adjustable spray nozzle can be used with pressure washers up to 3300psi (nozzle size 040).  Features 3 high pressure nozzles (0 degree / 25 degree / 40 degree) and 2 low pressure nozzles (wide angle soap nozzle / rinsing nozzle). Multi-pattern spray nozzle features Select-A-Spray saving time and money by combining five of the most-used spray patterns in one durable aluminium nozzle. No more switching from one nozzle to the next, simply dial in the right spray pattern for the job.  Simple and fast changeover of nozzles with a quick rotation for spot cleaning, rinsing and detergent application. Spray patterns 0°, 25°, 40°, soap spray and rinse.

Stainless steel professional drain cleaning nozzle for industrial use with 3 rear facing jets. Max. working pressure 7300 PSI / 500 Bar up to 36 litres / minute.  With 3 rear facing jets, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 160 Bar to 500 Bar up to 36 litres / minute flowrate.  Has a 1/8" female screw thread connection.

PLEASE SELECT THE CORRECT COUPLING TO SUIT YOUR PRESSURE WASHER.   1/4" female screw thread with choice of adapters to fit Bosch, Bosch AQT, Karcher K series, Kew Industrial, Lavor, Nilfisk Alto, Nilfisk Gerni, Black & Decker, Kranzle pressure washers.  To be used in conjunction with a pressure washer up to 2175psi (150 Bar).  Complete with 1000ml bottle. Variable angle spray pattern nozzle and chemical adjustable to control the amount of foam The new design heavy duty foam injection lance/ bottle connects to your existing pressure washers gun. This foam bottles gives fantastic results, spraying foam all over the vehicle creating the 'snow bath effect' and excellent cleaning ability. Simply spray over vehicle and leave the foam to dwell, soaking up the dirt in the process, rinse and dry leaving an excellent finish.

11.6mm (1/4") quick release male 5in1 adjustable spray nozzle can be used with pressure washers up to 3300psi (nozzle size 040).  Features 3 high pressure nozzles (0 degree / 25 degree / 40 degree) and 2 low pressure nozzles (wide angle soap nozzle / rinsing nozzle). Multi-pattern spray nozzle features Select-A-Spray saving time and money by combining five of the most-used spray patterns in one durable aluminium nozzle. No more switching from one nozzle to the next, simply dial in the right spray pattern for the job.  Simple and fast changeover of nozzles with a quick rotation for spot cleaning, rinsing and detergent application. Spray patterns 0°, 25°, 40°, soap spray and rinse.

Set of 4 High Pressure Spray Jet Nozzle with 0° / 15° / 25° / 40° fan - Stainless Steel 1/4" BSP male screw thread.  Fits all 1/4" BSP female lances - standard European supply. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

Stainless steel professional drain cleaning nozzlefor industrial use with 3 rear facing jets. Max. working pressure 7300 PSI / 500 Bar up to 36 litres / minute.  With 3 rear facing jets, these help to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 160 Bar to 500 Bar up to 36 litres / minute flowrate.  Has a 1/4" female screw thread connection.

Professional drain cleaning nozzle for industrial use. Steel bullet head with 1 forward facing jet and 3 rear facing jets. Max. working pressure 5500 PSI / 380 Bar up to 36 litres / minute.  With one forward facing jet and 3 rear facing jets, these help to cut a hole through the obstruction and the rear facing jets to drive the nozzle ahead so undermining the blockage and clearing the way. Ideal for pressure washers from 160 Bar to 380 Bar up to 36 litres / minute flowrate.  Nozzle size 050 with 3/8" (14.8mm) male quick release connection.

The best selling pressure washer accessory.  Fantastic power and performance from this spinning nozzle which is ideal for removal of heavy dirt, grime from flooring, and will even remove flaking paint from brickwork.  The Turbo nozzle almost doubles the cleaning power.  Brilliant on block paving and for removal of moss and green algae.  Will fit all standard lances with 1/4” male threaded end or 1/4" (11.6mm) quick release outlet. Max. pressure 2900 PSI (200 bar) at 85°C. Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

120° Pivoting coupling offers versatile performance with 5 different cleaning angles for hard to reach areas.  1/4" female screw thread for the inlet to 11.6mm (1/4") female quick release outlet.Note: Requires 11.6mm (1/4") quick release nozzles, not included

120° Pivoting coupling offers versatile performance with 5 different cleaning angles for hard to reach areas.  11.6mm (1/4") male quick release for the inlet to 11.6mm (1/4") female quick release outlet. Note: Requires 11.6mm (1/4") quick release nozzles, not included

240° Pivoting coupling offers versatile performance with adjustable cleaning angles for hard to reach areas.  11.6mm (1/4") male quick release for the inlet to 11.6mm (1/4") female quick release outlet. Note: Requires 11.6mm (1/4") quick release nozzles, not included