Pressure Washer Accessories

Kiam trigger gun and 500mm lance rated up to 250 Bar at 90°C.  It has a 3/8" (14.8mm) male quick release connector at the bottom of the gun to attach to a hose and a 1/4" (11.6mm) female quick release outlet at the end of the lance to attach a quick release nozzle.

Convert Bosch pressure washers lances to fit Karcher 'k' series trigger guns.   No need to throw away your old pressure washer attachments.  This robust plastic adapter converts Bosch attachments into Karcher compatible attachments. Specification:Max. Pressure - 140bar / 1800psiMax. Temperature - 60°C

Heavy duty trigger gun with 3/8" female bsp screw thread coupling on inlet (to connect to hose) and a 1/4" bsp female screw thread outlet (to connect to lance or nozzle) rated up to 5000psi. Specification:Max. Pressure - 5000 PSI / 345 BarMax. Flowrate - 40 litres/minuteMax. Temperature - 150°C

For use with most domestic type pressure washers with an M22 hose coupling.  The trigger gun is rated up to 3000 PSI (200 bar), 21 litres per minute at 60°C.  Complete with a 500mm lance and a variable nozzle with a twist grip to alter the width of spray fan and push / pull to apply detergent.

15m Flexible Drain Hose - Wiggly Nozzle, - Simply attach to your pressure washer, place inside the drain and the watch the powerful water jets clean out the debri & blockages from within the drain.suits Bosch, Karcher, Kew, Lavor, Nilfisk Domestic pressure washers.WATCH THE VIDEO BELOWFlexible drain cleaning hose - 15 metres long. Complete with wiggly nozzle - giving greater impact into dirt & blockagesThe forward nozzle pushes the wiggly steel probe into the obstruction and induces the wiggling effect.Features 1/4" Male screw thread with choice of adapters to suit Bosch, Karcher, Kew, Lavor, Nilfisk.

Ideal for ROOF CLEANING and  / or cleaning under the car, wheel arches, and even around corners.  Features a M22 male screw thread inlet and a 1/4" (11.6mm) quick release female outlet. Will connect to the end of all M22 telescopic lance outlets or M22 trigger guns. 500mm (27.5") lance, will work up to 160°C.

Heavy duty 5/16" high pressure hose fitted with M22 female screw thread on one end and M22 male screw thread on the other end.  Also features a heavy duty thick rubber cover sleeving to protect against being dragged along the floor, etc. The hose is the HIGHEST QUALITY type hose for extra durability and long life. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  Please ensure these connections are compatible with your machine and gun. SpecificationMax. Pressure: 3600 PSI / 250 BarMax. Temperature: 100°CCoupling 1: M22 (14mm Internal Spigot) Female Screw ThreadCoupling 2: M22 (14mm Internal Spigot) Male Screw Thread

Stainless steel 1/4" (11.6mm) quick release high pressure 15 degree nozzle jet. These jets all pressure washers where they simply snap into the end of the lance.  Available in multiple nozzle sizes (If you are unsure you can call us for advice on 0151 548 5500. You will need to tell us the pump pressure and flow rate so we can help). Nozzle Size ChartUse the pressure washer nozzle size chart below to select the correct nozzle for your pressure washer. For example: If you have a pressure washer rated at 100 Bar and 11 litres/min start at the 100 bar column, slide down until you get to the number nearest 11, in this case 11.3, now look to the green column which is a 05 nozzle. Now decide which angle spray pattern best suits your needs. Note: PRESSURE CONVERSION. If you want to convert PSI to BAR, divide the PSI value by 15.

This connection adapter will join two male CLICK hoses together. Max. Pressure: 160 barMax. Temperature: 60°C

10m Flexible Drain Hose - Wiggly Nozzle, - Simply attach to your pressure washer, place inside the drain and the watch the powerful water jets clean out the debri & blockages from within the drain.suits Bosch, Karcher, Kew, Lavor, Nilfisk, kranzle, M22, Bosch AQT Domestic pressure washers.Flexible drain cleaning hose - 10 metres long. Complete with wiggly nozzle - giving greater impact into dirt & blockagesThe forward nozzle pushes the wiggly steel probe into the obstruction and induces the wiggling effect.Features 1/4" Male screw thread with choice of adapters to suit Bosch, Karcher, Kew, Lavor, Nilfisk.

240° Pivoting coupling offers versatile performance with adjustable cleaning angles for hard to reach areas.  11.6mm (1/4") male quick release for the inlet to 11.6mm (1/4") female quick release outlet. Note: Requires 11.6mm (1/4") quick release nozzles, not included

300mm (12") brush head for Aquaspray water fed poles

30m Flexible Drain Hose - Simply attach to your pressure washer, place inside the drain and the watch the powerful water jets clean out the debris & blockages from within the drain. Retrojet Nozzle, suits Bosch, Karcher, Kew, Lavor, Nilfisk Domestic pressure washers. Flexible drain cleaning hose - 30 metres long. Complete with retrojet nozzle - giving greater impact into dirt & blockages Features 4 rear facing jets - these nozzles drive the hose forward and undermine the debris, so clearing the obstruction. Features 1/4" Male screw thread with choice of adapters to suit Bosch, Karcher, Kew, Lavor, Nilfisk.

M22 male screw thread to M22 male screw thread coupling. NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Replacement recoil starter for Kiam 3700P.  The housing is made from steel, features the steel pawls that shoot out on pulling the starter cord

M22 female screw thread to 3/8" BSP female screw thread coupling NOTE: The M22 couplings have a 14mm internal spigot, this will not suit M22 threads that have a 15mm internal spigot as it will not seal causing a leak.  

Heavy duty Kiam trigger gun rated up to 250 Bar at 60°C with a twin lance.  Features a 3/8" (14.8mm) male quick release at the bottom of the gun to connect to a hose.  The twin lance comes with a brass high-low switch valve with handle to allow quick change between high and low pressure application.  The lance comes pre-fitted with a brass detergent nozzle and a 1/4" (11.6mm) quick release nozzle holder.

Heavy duty 10m industrial high pressure hose extension with smooth cover rated up to 250 bar (3600psi) at 100°C.  Features non marking weather resistant anti-abrasive cover.  Has a 3/8" (14.8mm) female quick release on one end and a 3/8" (14.8mm) male quick release on the other.

The mud sucker uses a high pressure water stream (1000-4000 PSI) to suck off the bottom of pits or tanks and eject it through a hose to a disposal tank. The base unit attaches to the end of a pressure washer lance with a 1/4" quick release coupling.It acts as a high volume sludge pump able to extract stones (up to 20mm) sludge, dirt, sand and other sediment from wet areas such as ponds, barrels, flooded cellars etc. Maximum output is 18000 ltrs/hr. Checkout this video by Squeeky Clean Dave on how to use our Mud sucker...  Performance Guide100 Bar @ 10 lpm High Pressure Washer - Flow = 170 lpm (10000 lph)150 Bar @ 12 lpm High Pressure Washer - Flow = 220 lpm (13000 lph)200 Bar @ 15 lpm High Pressure Washer - Flow = 300 lpm (18000 lph)

Heavy duty industrial trigger gun with side handle and soft touch rubber grips rated up to 4000PSI (275 Bar) / 60°C.  Fitted with a 3/8" (14.8mm) male quick release connection to hose and a M22 female connection to a lance.

Heavy duty Kiam trigger gun rated up to 250 Bar at 60°C.  Features a 3/8" (14.8mm) male quick release at the bottom of the gun to connect to a hose and a M22 female screw thread on the end of the gun for a lance, accessories, etc.

15m Flexible Drain Hose - Retrojet Nozzle,- Simply attach to your pressure washer, place inside the drain and the watch the powerful water jets clean out the debris & blockages from within the drain.suits Bosch, Karcher, Kew, Lavor, Nilfisk, gerni, AQT & Kranzle, M22 Domestic pressure washers. Flexible drain cleaning hose - 15 metres long. Complete with retrojet nozzle - giving greater impact into dirt & blockages Features 4 rear facing jets - these nozzles drive the hose forward and undermine the debris, so clearing the obstruction. Features 1/4" Male screw thread with choice of adapters to suit Bosch, Karcher, Kew, Lavor, Nilfisk.

This set includes 2 couplings: 1. Heavy duty steel TEMA type male quick release pressure washer coupling to a 3/8" female screw thread, rated up to 350 bar. 2. Heavy duty steel TEMA type TEM02 female quick release pressure washer coupling to a 3/8" female screw thread, rated up to 350 bar.  Features two heavy duty internal o-rings.

This heavy duty coupling allows hoses and wash gun to swivel whilst under pressure.  Features a 3/8" male screw thread on on end and a 3/8" female screw thread on the other.  Suitable for pressures up to 3200PSI (220 bar) at 140°C.